Hardside and softside waterbeds
Hardside = Water cores inside a solid frame
Softside = Water cores inside a foam frame
Solid underfloor or deck
Heating element rests on solid underfloor
Deck can be insulated to a depth of max. 10 mm
Mono system = Bed with 1 water core
Water core height at least 10 cm, length up to 240 cm
and breadth over 110 cm
One heater per water core is required.
The heater should preferably be installed by a professional beneath the safety surround and approx. 10 cm distant from the edge, in strict compliance with the operating and fitting instructions.
Mains voltage: 230 volts | Rated frequency: 50 hertz | Rated power: 320 watts | Temperature control range: 24°C - 36°C | Temperature tolerance: ± 0.1°C | Magnetic field strength: 2.8 nT - 24.7 nT (official limit Germany: 100,000 nT) | Electrical field strength: 4 - 6 V/m (official limit Germany: 5,000 V/m | Heating element dimensions: 705 mm x 380 mm x 1 mm | Length of power cable: 1.5 m
Thermal fuse: Yes | Electric fuse: Yes | Earthing: Yes | Shielding: Yes | Thermostat insulation: 8,000 volts (official regulation: 1,230 volts) | Heating element insulation: 2 x 2,000 volts (official regulation = 1,230 volts) | Waterproof (heating element): IP67
TÜV Süd-GS, SAA, TÜV Süd-EMC (EMF / EMV), CE
WEEE-Reg Nr: DE 32636890
Information about our TÜV Süd certificates please visit