„Classic“ 240 watts - analogue


„Classic“ 240 watts - analogue

Überschrift für Tab 1:

  • Energy-saving heater
    Almost 99.9% of the input energy/current is converted into heat
  • TÜV Süd certified safety
    Information about our TÜV Süd certificates can be found at
  • Shielded heating element
    For optimum biocompatibility
  • Plug-in heating element
    The heating element can be unplugged from the adjustment thermostat for easy fitting and replacement
  • Flexible but sturdy heating element
    Can be pushed under water cores even when they are already filled
  • Gentle surface temperature
    Causes no ageing to the vinyl or other materials
  • Temperature range from 25°C to 35°C
    Individually adjustable
  • Child lock
    Prevents unwanted change in setting

Überschrift für Tab 2:
Suitable for

Geeignet für:

The “Classic” 240 watt heater system is suitable for:

Hardside and softside waterbeds
Hardside = Water cores inside a solid frame
Softside = Water cores inside a foam frame

Solid underfloor or deck
Heating element rests on solid underfloor
Deck can be insulated to a depth of max. 10 mm

Dual systems and small mono systems
Dual system = Bed with 2 water cores
Mono system = Bed with 1 water core
Water core height at least 10 cm, length up to 240 cm
and breadth up to 100 cm

Important note
One heater per water core is required.

The heater should preferably be installed by a professional beneath the safety surround and approx. 10 cm distant from the edge, in strict compliance with the operating and fitting instructions.

Überschrift für Tab 3:


Technical data:
Mains voltage: 230 volts | Rated frequency: 50 hertz | Rated power: 240 watts | Temperature control range: 25°C - 35°C | Temperature tolerance: ± 0.1°C | Magnetic field strength: 2.8 nT - 24.7 nT (official limit Germany: 100,000 nT) | Electrical field strength: 4 - 6 V/m (official limit Germany: 5,000 V/m | Heating element dimensions: 705 mm x 290 mm x 1 mm | Length of power cable: 1.5 m

Thermal fuse: Yes | Electric fuse: Yes | Earthing: Yes | Shielding: Yes | Thermostat insulation: 8,000 volts (official regulation: 1,230 volts) | Heating element insulation: 2 x 2,000 volts (official regulation = 1,230 volts) | Waterproof (heating element): IP67

WEEE-Reg Nr: DE 32636890

Information about our TÜV Süd certificates please visit

Bilder wählen:

Bild für Zertifikate: